Quick Answer: Why Half Wave Dipole Antenna Is Used?

What is a folded dipole antenna?


A folded dipole is an antenna, with two conductors connected on both sides, and folded to form a cylindrical closed shape, to which feed is given at the center.

The length of the dipole is half of the wavelength.

Hence, it is called as half wave folded dipole antenna..

Why dipole antennas are a half wave long?

This is slightly shorter than the equivalent length of a wave travelling in free space as the antenna conductors affect the wavelength. The voltage and current levels vary along the length of the radiating section of the antenna. This occurs because standing waves are set up along the length of the radiating element.

Is a full wavelength antenna better?

A full wavelength vertical antenna will have a big null at the horizon with lobes pointing up and down and a wet noodle will probably work better unless your talking to the space shuttle.

What is a half wave antenna?

The half wave dipole is the most popular version of the dipole antenna or aerial. As the name implies, the half wave dipole is a half wavelength long. This is the shortest resonant length that can be used for a resonant dipole. It also has a very convenient radiation pattern.

Why does antenna length depend on wavelength?

Summary: The fact that the length of an antenna is of similar size to the wavelength of light is a coincidence due to the similarity of the speed of light in air and the speed of light in the antenna (which are usually copper wires).

What is a dipole antenna used for?

The dipole antenna is a particularly important form of RF antenna which is very widely used for radio transmitting and receiving applications. The dipole is often used on its own as an RF antenna, but it also forms the essential element in many other types of RF antenna.

What is the beamwidth for a half wave dipole antenna?

The directivity of a half-wave dipole antenna is 1.64 (2.15 dB).

What does a dipole antenna look like?

A dipole antenna commonly consists of two identical conductive elements such as metal wires or rods. … Most commonly it consists of two conductors of equal length oriented end-to-end with the feedline connected between them. Dipoles are frequently used as resonant antennas.

How long is a half wave antenna?

The Half-Wave Dipole Antenna One wavelength at 600 MHz is = c / f = 0.5 meters. Hence, the half-wavelength dipole antenna’s length is 0.25 meters.

How does a dipole antenna work?

A dipole antenna commonly consists of two identical conductive elements such as metal wires or rods. The driving current from the transmitter is applied, or for receiving antennas the output signal to the receiver is taken, between the two halves of the antenna. … Dipoles are frequently used as resonant antennas.

What is the gain of a half wave dipole?

Neglecting electrical inefficiency, the antenna gain is equal to the directive gain, which is 1.5 (1.76 dBi) for a short dipole, increasing to 1.64 (2.15 dBi) for a half-wave dipole.

Does a dipole have to be straight?

Dipole antennas need not be installed in a horizontal straight line. They are generally tolerant of bending, sloping or drooping as required by the antenna site. Remember, however, that dipole antennas are RF conductors. … (So does the coax shield, unless it is routed at 90° from the antenna.)

Is a half wave antenna better than a quarter wave?

A half-wave antenna is a good choice when your entire device is much smaller than a quarter-wavelength, or when you are building an antenna that is physically separated from the transmitter.

What is a full wave antenna?

Advertisements. If the length of the dipole, i.e. the total wire, equals the full wavelength λ, then it is called as full wave dipole. If a full wavelength dipole is used either for transmission or for reception, let us see how the radiation will be.